ArchiCAD 22 6001 x64 Windows, MacOs [2018, ENG]

Новые Возможности

• Архитектурное проектирование:
  Усовершенствованы возможности Навесной Стены,
  Усовершенствованы возможности Лестницы,
  Усовершенствованы возможности Ограждения,
  Усовершенствованы возможности Профильных Конструкций
  
• Визуализация:
  Новый движок CineRender
  ARCHICAD 22 использует новый движок CineRender (R19), используя новые функции, в том числе:
  • Эффект тонового сопоставления
    
  • Стереоскопическая визуализация с использованием выделенной камеры
    
  • Сферическая камера, производящая 360-градусную или купольную визуализацию
    
  • Стереоскопические сферические визуализации (сочетание двух камер)
    
  • Оптимизированная производительность, в том числе:
    -Speedups для стандартного рендерера
    -Speedups для простых прозрачных пленок в физических и стандартных рендерерах
• Продуктивность:
  Значения свойств, определяемые математическими выражением
  Свободное создание параметрических Выносных Надписей
  Усовершенствован, на плане, пересечение приоритетов Многослойных Конструкций
  Введены единицы Дециметры в Рабочей Среде
  Обновлено параметры Графической Замены
  Обновлено параметры Модельного Вида
  Добавлен идентификатор Graphisoft ID
  Поддержка Trackpad и Magic Mouse для Mac
  Расширенные параметры безопасности для PDF
  Улучшения обнаружения Колизий
  Небольшие улучшения
  • Палитра выбора была упрощена и ее интерфейс модернизирован; новая функция Redefine позволяет обновить любой выбранный набор выбора в зависимости от выбора текущего элемента.
    
  • Новая опция рабочей среды, в разделе «Экранные параметры», чтобы включить / выключить контуры для всех предварительных просмотров в режиме «Избранное» и «Объект».
    
  • Выбор верхних элементов в Плане этажей теперь опускает их обнаружение поверхности, чтобы уделить приоритетное внимание выбору необработанных элементов. Выберите верхние элементы по их контуру.
    
  • Настройки передачи элементов: определения Home Story теперь сохранены правильно. Соответственно были соответственно изменены наборы и значение по умолчанию.
    
  • Настройки переноса элемента: добавлены новые параметры для стены занавеса, включая классы и шаблон схемы.
    
  • «Опорная линия» алгоритм создания зоны автоматически определяет логическую границу зоны, где стены и навесные стены образуют замкнутое пространство.
    
  • Повторите ассоциирование метки с другим элементом с помощью Cmd / Ctrl + Click.
    
  • Линии сетки, видимые в разделе: исправление ошибок, чтобы убедиться, что пользовательские настройки будут «правильно вставлены».
    
  • Обновлен интерфейс для изучения Sun и создания диалоговых окон Fly-Through; новая обратная связь «Общая длина» показывает, как долго будет выполняться экспортированный фильм (общие кадры делятся на частоту кадров).
    
  • Новый алгоритм вычисления положения Солнца с использованием алгоритма солнечной позиции Национальной лаборатории возобновляемой энергии США дает более точное теневое литье (например, для 3D-проекции и исследования Солнца). Установка даты теперь включает год.
    
  • Списки рабочей среды теперь поддерживают множественный выбор: редактируйте несколько элементов одновременно, когда вы показываете / скрываете «Настройки инструмента» и «Информационное окно», а также добавляете / удаляете панель инструментов и элементы меню.
    
  • Новый системный автотекст на сегодняшний день, включая: День месяца / Неделя, Месяц (имя) / (число) и Год (короткий / длинный).
    
  • Интерактивное расписание, диалоговое окно «Размер расписания ячеек» теперь поддерживает редактирование с несколькими выборами и новые кнопки для изменения размера всех строк и столбцов для соответствия содержимому одним нажатием.
    
  • Новая команда «Инфо-поле» на панели «Элемент», для всех частей библиотеки (например, «Двери», «Windows», «Объекты»), «Сбросить настройки по умолчанию», без необходимости открывать настройки и переключаться туда и обратно на части библиотеки.
    
  • Параметры поверхности, новые из каталога: после выбора элемента во время поиска выбор сохраняется даже после очистки поиска
    
  • Редактировать ширину и высоту квадратных и профилированных столбцов графически на плане этажей через их граничные узлы (ранее доступные только в 3D)
    
  • Растяжение прямоугольной колонны в плане этажа или 3D теперь всегда придерживается определенного анкера (ранее всегда используемого центра)
  Разные изменения в языковых версиях программы
  
• Производительность:
  Улучшенная производительность элементов Morph
  • В ARCHICAD 22 мы значительно увеличили производительность большого количества сложных элементов Morph. Это было достигнуто за счет уменьшения объема памяти, что потребует меньше памяти по сравнению с версией 21.
  Функция панорамирования и масштабирования обеспечивает естественный и плавный пользовательский интерфейс даже для больших моделей в виде плана этажа, сечения, высоты, рабочего листа и трехмерного документа. Повышение производительности будет достигнуто за счет использования:
  • Расширенные возможности / ресурсы аппаратного обеспечения и драйверов ОС, например: создание сложных люков / заливок / поверхностей обрезки / заливок будут полностью выполнены массивом графических процессоров
  • Еще одна улучшенная система кэширования, которая уменьшит количество поколений представлений
  • Трассировка и регенерация ссылок могут быть прерваны только путем продолжения навигации, что позволяет пользователям постоянно отслеживать и ссылаться, не влияя на производительность
  • Панорамирование, масштабирование и навигация уже способны использовать несколько ядер компьютера, теперь они разработаны для лучшего использования вычислительной мощности для меняющихся потребностей непрерывной навигации. Поскольку элементы появляются и исчезают во время навигации, алгоритм непрерывно балансирует задачи вычисления между ядрами, чтобы убедиться, что все они заканчиваются одновременно, поэтому время не теряется в ожидании перегруженных ядер. Это происходит в фоновом режиме непрерывно, и он может увеличить частоту кадров изображения, делая навигацию намного более гладкой.
  Повышение эффективности резервирования элементов командной работы
  • В ARCHICAD 22 мы значительно увеличили производительность резервирования элементов в Teamwork, поэтому потребуется лишь небольшая часть секунды, даже для очень больших наборов. Это позволит убедиться, что функция «Помощник резервирования» обеспечит отличный пользовательский интерфейс.
    • Примечание. Недоступно в BIMcloud Basic.
  Поддержка высокого разрешения WIN
  • Экран 4k / 5k обеспечивает гораздо более четкое отображение деталей; теперь ARCHICAD может использовать это разрешение, подобно экрану сетчатки на MAC, для рисования дополнительной информации о значках, линиях и т. д. и производить гораздо более острый взгляд (Windows 10 и выше).
• Совместимость:
  Экспорт компонентов и свойств компонентов в IFC
  Импорт свойств IFC как свойств ARCHICAD
  Импорт геометрии NURBS из файлов IFC
  Отображение слоев при импорте модели IFC
  Импорт / экспорт файлов DWG / DXF 2018
  
• Улучшение библиотек:
  Усовершенствования общей библиотеки
  • Умный текст в текстах, связанных с GDL
    
  • Новые параметры детализации для частей библиотеки (варианты просмотра модели)
    
  • Новые геометрии для общих частей библиотеки
    
  • Усиленная столешница
    
  • Усовершенствованный кухонный шкаф
    
  • Улучшенная метка Выносной Надписи
    
  • Новые функции в Выносной Надписи
  Усовершенствования библиотек в разных языковых версиях программы
  
• ARCHICAD – Grasshopper LIVE connection
  Узел деконструирования (введен в обновление AC21 2)
  Узел GDL - Создание содержимого статической библиотеки (введено в обновлении AC21 2)
  Обновленный узел навесной стены - новая функция пользовательских шаблонов для AC22

Исправления и улучшения в обновлении 4005

• 244818 CRASH: ARCHICAD sometimes crashed when placing a Hotlinked IFC.
  
• 249325 CRASH: ARCHICAD crashed with circular columns using a building material with Fit to Skin set.
  
• 249826 CRASH: Changing Model View Options of elements, commonly skylights, with a certain combination of Renovation Filter options could result in a crash.
  
• 249162 CRASH: Copy-pasting between Interior Elevations could cause errors and crashes.
  
• 245293 CRASH: On macOS High Sierra ARCHICAD 22 handles video cards better. On macOS Sierra the Multisample anti-aliasing function is still disabled (if a 4K display is connected) to avoid performance issues or crash.
  
• 247002 CRASH: ARCHICAD crashed in certain files when the user opened Attribute Manager.
  
• 248802 DOCUMENT/CRASH: If an Interactive Element Schedule included missing criteria, replacing a line type in Attribute Manager resulted in crash.
  
• 246717 DOCUMENT/CRASH: Some railings caused the door schedule to crash.
  
• 247645 DOCUMENT/OPEN/SPEED: The refresh of object screen representations (object icons) was not optimized; this contributed to performance issues with large projects.
  
• 249329 DOCUMENT: Field „Part of Current Issue” was missing from criteria for Index Settings / Layouts (Sheet Index).
  
• 239636 DOCUMENT: Formatting of area values with square feet was not correct in the Schedule, if the chart was placed on the Layout.
  
• 248641 DOCUMENT: Hot spot disappeared if the user zoomed out too much.
  
• 248633 DOCUMENT: It was impossible to use a library part parameter as criteria for an Interactive Schedule.
  
• 248316 DOCUMENT: Scale was not considered when calculating true line weight of migrated schedules. This often made lines appear more thick than they should be.
  
• 245238 DOCUMENT: Sheet index stopped following the Layout book order.
  
• 250409 DOCUMENT: The any composite criteria in the ARCHICAD 22 Schedule was implemented incorrectly.
  
• 244745 DOCUMENT: The Marked Distant effect didn't work properly.
  
• 246024 DOCUMENTATION: Render of 3D axonometry zoomed out during rendering.
  
• 249399 EDIT/CRASH: ARCHICAD crashed after changing Renovation Filter settings, if Lines were categorized as Skin Separators.
  
• 248805 EDIT/CRASH: The Curtain Wall frame contained an incorrectly mapped IFC Property and could crash ARCHICAD when editing the frame in the settings dialog.
  
• 249095 EDIT/CRASH: The Curtain Wall profile property failed to address all options and could crash ARCHICAD when switching to the Frames panel.
  
• 249450 EDIT/MODEL: 3D window hotspots for doors and windows in ARCHICAD 22 were not available, if the window and door model elements were unchecked in Filter and Cut Elements in 3D.
  
• 246304 EDIT/MODEL: A change of the Section Status affected the Cut Fill of New Elements, if the New Element's Renovation Filter was overridden.
  
• 250265 EDIT: A level dimension was deleted when Search and Replace found matching text in it.
  
• 247854 EDIT: Search functions did not work with double-byte characters in JPN version of ARCHICAD.
  
• 248768 FILE/EXPORT/BIMx: Surfaces with names longer than 31 bytes exported incorrectly to BIMx.
  
• 248638 FILE/IFC/EXPORT/EDIT: After applying SEO on profiled sheet 21, the object is not visible in the IFC export.
  
• 232030 FILE/IFC/EXPORT: Circular zone boundaries were not exported to IFC correctly and large room separators were observed in Revit 2017 where the IFC file was opened.
  
• 246949 FILE/IFC/IMPORT: IFC import crashed for some projects that contained slab opening cuts which were as large as the entire slab polygon.
  
• 247623 FILE/OPEN/CRASH: Some projects using revision management, crashed on migration to ARCHICAD 22.
  
• 246098 FILE/OPEN/FREEZE: ARCHICAD start-up took more than a minute, if CineRender start-up was delayed due slow operating system calls.
  
• 243178 FILE/OPEN/GDL: When an ARCHICAD 21 project was migrated to version 22, migration process failed on some parts of Stair Favorites.
  
• 249813 FILE/OPEN/MODEL: If a project was opened with ARCHICAD 22, the content under a stair's default settings dialog was inconsistent.
  
• 248355 HOTLINK/CRASH: Railing modifications crashed ARCHICAD during the Hotlink update process.
  
• 246114 HOTLINK/CRASH: Third party add-on modifications crashed ARCHICAD during the Hotlink update process.
  
• 250512 MODEL/CRASH: If a railing of certain geometry was reloaded, ARCHICAD crashed.
  
• 248117 MODEL/CRASH: Some curtain walls that originated in ARCHICAD 20 crashed ARCHICAD 22 while being edited.
  
• 243380 MODEL: 3D explore mode noticeably dropped too many objects to maintain a reasonable rendering performance.
  
• 244517 MODEL: It was not possible to modify a Curtain Wall in Edit mode in Section/Elevation views.
  
• 247328 MODEL: 3D Project Preview image was scaled incorrectly on macOS 4K Retina Displays
  
• 249265 MODEL: ARCHICAD was unable to import/export attributes correctly that contained add-on data.
  
• 248586 MODEL: Single Floor Marquee operation affected the elements on other floors.
  
• 246856 MODEL: When a stair's flight and landing had tread gaps of different size, connection between flight and landing was incorrect.
  
• 248278 MODELING: The floor plan did not refresh automatically after changing renovation filters.
  
• 250533 PERFORMANCE: On macOS High Sierra ARCHICAD 22 handles video cards better. On macOS Sierra the Multisample anti-aliasing function is still disabled (if a 4K display is connected) to avoid performance issues or crash.
  
• 250959 SPEED: ARCHICAD 22 3D performance was slower compared to ARCHICAD 21.
  
• 247437 SPEED: ARCHICAD was becoming slower and slower the more detail/documentation was produced.
  
• 248924 TEAMWORK/GDL/EDIT/CRASH: The 2D Symbol object editing window incorrectly addressed Teamwork autoreserve which led to ARCHICAD crashing.
  
• 246855 USER INTERFACE/EDIT/SPEED: Slow performance with cursor operations was a result of the snap point option setting "Between Intersection Points.
  
• 248304 USER INTERFACE: File dialog controls were missing on Hebrew/Farsi windows.

Исправления и улучшения в обновлении 4023

• In earlier versions, whenever the Frames Per Second (FPS) value became unacceptably low, ARCHICAD automatically improved the feedback by temporaly skipping the redraw of some elements. This set of skipped elements was randomly generated – sometimes causing surprising results in complex models.

• As of ARCHICAD 22 Update 4023, ARCHICAD maintains feedback speed in a smarter way:
  • „Primary” elements never disappear during navigation, regardless of FPS. Key elements for finding your way are always displayed.
  • „Secondary” elements are displayed based on their distance from the viewcone. Close-in elements are prioritized, and those furthest away are – if necessary – the first to be dropped.

• This algorithm, which improves navigation speed through selective element display, applies ONLY if 3D navigation falls below a set FPS rate, as defined by the user, and only until FPS reaches an acceptable threshold.

• 250910 FILE/EXPORT/3DM: ARCHICAD 22 incorrectly formatted exported 3DM files.
  
• 252560 HOTLINK: Custom modifier values sometimes changed in the host file after a hotlink update.
  
• 252655 TEAMWORK/HOTLINK: Parametric profiles with custom modifiers were not robustly handled in teamworked hotlinks.
  
• 252900 CRASH: ARCHICAD sometimes crashed when adjusting the scroll bar in Cadimage window settings.
  This package contains the fixes and improvements of the previous Updates as well.

Исправления и улучшения в обновлении 5009

• 255315 CRASH: The process of opening the tool default for a beam that was modelled from a complex profile crashed ARCHICAD.
  
• 251538 CRASH: A short segment created by the railing tool crashed ARCHICAD.
  
• 254145 CRASH: ARCHICAD crashed during the use of "Edit selected composite" with certain slabs.
  
• 252724 CRASH: ARCHICAD crashed when opening a project containing an illegal character in an object.
  
• 253592 CRASH: ARCHICAD crashed when publishing a DWG. Autotext handling was at fault.
  
• 250874 CRASH: ARCHICAD crashed when selecting "Open source view with reference to layout".
  
• 249212 CRASH: ARCHICAD sometimes crashed when favorites were requested in Grasshopper through the ARCHICAD-Grasshopper Connection add-on.
  
• 246781 CRASH: ARCHICAD sometimes crashed when hotlinks with parametric profiles were updated.
  
• 240853 CRASH: Migration of ARCHICAD 21 files with certain curtain wall frames crashed ARCHICAD 22.
  
• 247927 CRASH: Some edges created by GDL objects crashed ARCHICAD in 3D view.
  
• 254435 CRASH: The FillIndexList property was not handled correctly for roofs and slabs, which occassionally crashed ARCHICAD when an elevation was opened.
  
• 247870 DOCUMENT: Autotext labels referenced properties based on their Globally Unique IDs. This led to empty labels if user created properties were imported into and used in another project.
  
• 254500 DOCUMENT: Custom made properties of the Classification and Properties Label 22 were not transferred with the Label Favorite.
  
• 253197 DOCUMENT: Schedules used a space as a thousands separator for formatting numbers.
  
• 252694 DOCUMENT: The 2D perspective viewpoint changed after rebuilding or reopening.
  
• 246031 DOCUMENT: The Pen set changed to all black randomly.
  
• 253924, 248678 DOCUMENT: The width of the index column in the Attribute Manager has been increased.
  
• 220248 DOCUMENT: Zone listing parameters were not displayed correctly in the Interactive Schedule, if their default sorting was changed.
  
• 252388 DOCUMENT/CRASH: ARCHICAD crashed when a view with a corrupt fill was placed on a layout.
  
• 250728 DOCUMENT/CRASH: If the default livetype was deleted, opening the Attribute Manager sometimes resulted in a crash.
  
• 251246 DOCUMENT/FREEZE: Layouts refreshed slowly, if there were lines that crossed the drawing's border.
  
• 254571 EDIT: Image fill created with mirrored method didn't appear mirrored on macOS.
  
• 252335 EDIT: The deletion of railing sub-elements in edit mode, sometimes resulted in the deletion of the entire railing.
  
• 253667 FILE/BIMx/EXPORT: It was not possible to publish BIMx Hyper-models using an EDU or a Trial license.
  
• 250459 FILE/BIMx/EXPORT: It was possible to export GDL elements without an acType or typeID into BIMx Hyper-models.
  
• 253898 FILE/DWG/IMPORT: "Import Blocks from DXF/DWG" was not working in ARCHICAD 21 and 22.
  
• 247490 FILE/EXCEL/IMPORT: It was not possible to import False as a value for True/False-type Properties with the Import Property Values into Elements function.
  
• 253648 FILE/EXCEL/IMPORT: Property data in excel format could not be imported in ARCHICAD 22.
  
• 252565 FILE/IFC/SPEED: The speed of the IFC export with Space Containment active has been improved.
  
• 247320 FILE/IMPORT: ARCHICAD could not open Sketchup 2018 files.
  
• 251576 FILE/OPEN/CRASH: ARCHICAD 22 crashed in the opening process of a project, created in ARCHICAD 21, including complex profile walls with trapezoid geometry.
  
• 252178 FILE/PDF/EXPORT/DOCUMENT: PDFs published from ARCHICAD sometimes had hyperlinks that covered the whole page.
  
• 253535 GOODIES: Check duplicates add-on showed railing elements as duplicates.
  
• 251304 LMT: Invalid software key programming could occur in certain circumstances.
  
• 251753 LMT: Software key download did not work if the user's home folder path contained characters not representable by the OS's Control Panel/Region Format.
  
• 256462 MODEL: A corner frame of a curtain wall appeared rotated on Layout.
  
• 250924 MODEL: Elevation and section markers lost their Iinks.
  
• 255123 MODEL: On macOS occassionally section/elevations had to be regenerated to return elements that went missing.
  
• 250366 MODEL: On Macs, point clouds were only partially displayed in section/elevation.
  
• 194045, 244622 MODEL: The Trace reference colour turned grey after its transparency level changed.
  
• 255097 STAIR: Riser Text, Going Text and Separator Text were missing from the stair default settings in the japanese version.
  
• 250428 TEAMWORK/HOTLINK: The performance of ARCHICAD during the post processing phase has been improved.
  
• 250195 TEAMWORK/HOTLINK/CRASH: Symbols used with shells, morphs or roofs in a hotlink occassionally crashed ARCHICAD in Teamwork.
  
• 249309 TEAMWORK/MODEL: A PLN/PLA saved from a teamwork project had its railings significantly offset from their originally placed positions.
  
• 255385 TEAMWORK: A large numbers of curtain walls degraded send and receive performance.
  
• 253942 USER INTERFACE: Icons on the user interface could fail to load in certain situations.
  This package contains the fixes and improvements of the previous Updates as well.

Исправления и улучшения в обновлении 6001

• 248118 CRASH: A beam that intersected with a wall of 0 thickness crashed ARCHICAD.
  
• 254973 CRASH: A properties corruption caused ARCHICAD to crash when opening any tool.
  
• 256404 CRASH: ARCHICAD crashed on loading a project index, if a view had a corrupted renovation filter setting.
  
• 236618 CRASH: ARCHICAD crashed on some iMac computers when entering full screen.
  
• 256511 CRASH: ARCHICAD crashed using "Align to Decimal" alignment.
  
• 254436 CRASH: ARCHICAD crashed when a complex profile wall's fillet radius was less than the width of the wall.
  
• 256295 CRASH: ARCHICAD incorrectly handled the rendering of large textures.
  
• 259532 CRASH: ARCHICAD sometimes crashed when processing railings with geometries modified by other objects.
  
• 259476 CRASH: ARCHICAD sometimes crashed while releasing memory at closure.
  
• 254834 CRASH: Inherited sub-elements from parent elements with properties were not handled properly.
  
• 258564 CRASH: Interior Wizard incorrectly handled the undo queue.
  
• 259825 CRASH: Library migration sometimes failed while processing walls.
  
• 250028 CRASH: Opening a section that cut through windows in composite walls sometimes resulted in a crash.
  
• 255295 CRASH: Spell Check addon with Microsoft Office dictionary crashed ARCHICAD.
  
• 258709 CRASH: The pickup/inject parameters tool was not safe in curtain wall editing mode.
  
• 259119 CRASH: Connection/merge of roof/shell elements had a limited number of times it could be run before crashing ARCHICAD.
  
• 251847 DOCUMENT/CRASH: Fills created incorrectly by a faulty algorithm in an earlier build of ARCHICAD were not automatically corrected and crashed the ARCHICAD during the generation of the layout that contained the fill.
  
• 257464 DOCUMENT: A drawing from a rotated view source sometimes changed when zooming took place in the view.
  
• 259376 DOCUMENT: An opening's dimension markers were overridden, when placed on a layout.
  
• 256527 DOCUMENT: ISUNDEFINED function of the Expression-based Properties was not evaluated correctly for Option Set type Properties.
  
• 250511 DOCUMENT: Labels did not display Properties correctly on Layouts, if the source View was opened.
  
• 258044 DOCUMENT: Lines of elements sometimes disappeared on a layout with a corrupted drawing.
  
• 257660 DOCUMENT: Semi-transparent images were printed darker than they were on the screen.
  
• 258445 DOCUMENT: Sometimes a curtain wall's source view differed in its appearance on layout.
  
• 257929 DOCUMENT: The layout number in subset autotexts displayed incorrect values for split layouts.
  
• 248678 DOCUMENT: The width of the index column in the Attribute Manager has been increased.
  
• 255465 DOCUMENT: Expression Defined Properties did not consider the displayed accuracy of values, and for this reason rounding operations sometimes gave unexpected results.
  
• 254073 EDIT/CRASH: Edits to a criterium or atribute that later were revoked were not robustly handled leading sometimes to crashes.
  
• 253303 EDIT/CRASH: If Grasshopper palette was open, ARCHICAD crashed while placing a curtain wall.
  
• 251275 EDIT/ROOF/CRASH: ARCHICAD crashed when the roof was set from simple to complex geometry method.
  
• 236728 EDIT: A traced element's hotspot could not be snapped to if it fell outside the set range of the Section/Elevation displayed in the current window.
  
• 259963 EDIT: Holes of a beam disappeared, after the beam's ID was changed with the ID Manager.
  
• 253400 EDIT: If the Find&Select palette was open, objects that referenced zones had slow parameter transfer.
  
• 255917 EDIT: Overridden fills and lines, that were placed on a section, appeared with a different color on a layout.
  
• 256243 EDIT: The option "Move sub-element" on layout's pet palette was only available when clicking on the drawing's center point.
  
• 258667 EDIT: With command Trim Elements to Roof/Shell, only bottom edges of elements to trim were highlighted.
  
• 257662 FILE/.MTL/EXPORT: An exported .mtl file path was incompatible with localized versions of ARCHICAD.
  
• 256421 FILE/3DM/IMPORT/CRASH: If a Rhino model contained elements with invalid material attributes, its import into ARCHICAD sometimes resulted in a crash.
  
• 256307 FILE/CRASH: ARCHICAD crashed in a certain file when pasting a schedule on the layout.
  
• 253547 FILE/CRASH: ARCHICAD crashed with a certain file because of corrupted property data.
  
• 248681 FILE/DAE/IMPORT: ARCHICAD could not import Collada files.
  
• 253335 FILE/DWG/EXPORT/CRASH: A self-referencing XREF crashed ARCHICAD.
  
• 257845, 258500 FILE/DWG/EXPORT/CRASH: ARCHICAD sometimes crashed while publishing DWG with Xref-s including frozen (hidden) layers.
  
• 257832 FILE/DWG/EXPORT/CRASH: ARCHICAD crashed because of a nested XREFed DWG(s) with an invalid path.
  
• 255593 FILE/DWG/EXPORT: An imported DWG file with images, when exported from ARCHICAD lost its images.
  
• 258074 FILE/DWG/EXPORT: Graphical overrides made line thicknesses the same in the exported DWG.
  
• 258859 FILE/DWG/IMPORT/DOCUMENT: Attribute definitions were not displayed from AutoCAD blocks, if they were not translated as library parts.
  
• 246757 FILE/DWG/IMPORT: Text with annotative style was missing from imported DWG files.
  
• 253863 FILE/EDIT: Copy-Pasting was too slow with a certain file.
  
• 253754 FILE/IFC/EXPORT: Component Name parameters were numbers instead of Building Material Names.
  
• 259302 FILE/IFC/IMPORT/MODEL: IFC import sometimes gave incorrect size information to objects.
  
• 257411 FILE/IFC/IMPORT: IFC nested mapped elements were imported to ARCHICAD incorrectly.
  
• 257744 FILE/OBJ/EXPORT: Textures were missing from wavefront files when their names had special (non-English) characters in them.
  
• 260523 FILE/OPEN/CRASH: ARCHICAD crashed when opening a file from START Edition 2011 because Find and Select criteria were incorrectly converted during the file migration process.
  
• 254879 FILE/OPEN/CRASH: ARCHICAD sometimes crashed while opening a project with certain settings for stairs.
  
• 244754 FILE/OPEN: Previously saved witness lines settings of doors in a schedule switched back to their default settings after reopening the file.
  
• 238800 FILE/PDF/EXPORT: Dense fills caused memory leaks during PDF export.
  
• 254750, 255095 FILE/PDF/SAVE: ARCHICAD crashed when Issue History Index was saved as PDF with the 'Open after saving' option checked.
  
• 260039 FILE/XLSX/IMPORT/DOCUMENT: The property values import time degraded since the last release of ARCHICAD.
  
• 259701 FILE/XML/EXPORT: Model View Options Combination with a colon character in its name could not be exported on Windows.
  
• 257635 FILE: More robust logging was enabled.
  
• 260700 FREEZE: On mac, ARCHICAD froze while starting Roof Wizard, if its default layer was missing.
  
• 260531 FREEZE: Override combinations were not processed optimally.
  
• 254782 FREEZE: The snap guide was not equipped to handle more than 100 hotspots in one close region.
  
• 250650 GOODIES/CRASH: ARCHICAD sometimes crashed when trying to set a favorite with the Interior Wizard.
  
• 244814 GOODIES: Polygon Counting Tool was slower compared to the previous ARCHICAD versions.
  
• 229124 HOTLINK/CRASH: An associative railing that was linked to a different story than its parent element, placed as hotlink in a way that parent element didn’t fit in host file’s story structure, sometimes caused a crash while updating the hotlink.
  
• 255180 HOTLINK/IFC/CRASH: ARCHICAD sometimes within add-ons like Archiframe 22 crashed with hotlinked IFC files.
  
• 258965 MODEL/CRASH: ARCHICAD crashed because of a break mark calculation of a malformed railing of a stair.
  
• 246753 MODEL/CRASH: ARCHICAD crashed with a stair having drains on both sides with a greater offset value than the entire stair.
  
• 254968 MODEL/EDIT: Stairs in a Marquee could not be dragged.
  
• 255843 MODEL/MEP/FREEZE: Several MEP objects, like the pipe bend were not optimized for 3D navigation. They relied too heavily on the parameter script.
  
• 257582 MODEL/USER INTERFACE: Custom fills created from curved shapes that contained fills failed to render correctly in 2D.
  
• 258744 MODEL: "Best Match" tracing method of the Magic Wand Settings blocked creation of curved polylines.
  
• 254800 MODEL: A static dimension on a hidden layer moved with the marquee.
  
• 258129 MODEL: Beams were connected wrong in 3D, if they had an axis line offset.
  
• 256926 MODEL: Beams with different offsets joined incorrectly.
  
• 258115 MODEL: Curtain Wall frame connections sometimes incorrectly joined similarly prioritized elements.
  
• 256444 MODEL: Fills were not shown in Trace & Reference when the Work Environment Advanced Redraw Option for Model display was set to Simplified Model.
  
• 258366 MODEL: From certain angles of view, edges of construction elements appeared too thick with OpenGL.
  
• 259096 MODEL: If a column was placed elsewhere than origin, and its angle to Z axis was changed on section/elevation, angles to X and Y changed as well.
  
• 253231 MODEL: It was not possible to extrude several morphs at the same time.
  
• 259480 MODEL: Multiple selected objects that were nudged in a rotated view moved in an apparently random direction.
  
• 259353 MODEL: The creation of a wall or the dragging of a wall sometimes happened very slowly due to the zone it belonged to.
  
• 256667 MODEL: The default angle of a Curtain Wall remained 90°, if the angle of the applied favorite was smaller than 1°.
  
• 254446 MODEL: The Magic Wand was not able to select complete polylines from the trace.
  
• 238603 MODEL: The mirroring of a railing did not consider its offset.
  
• 259458 MODEL: When a roof's cover fill was unchecked, it still appeared on view when overridden.
  
• 252772 RENDERING: CineRender settings of a migrated project differed from the original source version.
  
• 255459 SPEED: Saving complex railing in a DWG file was slow.
  
• 256446 TEAMWORK/MODEL/HOTLINK: Railings sometimes lost balusters, if they were hotlinked from a Teamwork project.
  
• 258009 TEAMWORK: After a BIMcloud update some users experienced slow reservation times.
  
• 248736 TEAMWORK: No warning text appeared after opening a Teamwork file which had been previously packed by Travel Pack.
  
• 259638 TEAMWORK: Project preferences data relating to zones were not correctly handled in Teamwork.
  
• 256211 TEAMWORK: Reservation palette sometimes was slow to respond.
  
• 256882 TEAMWORK: Sometimes it was not possible to remove embedded library folders.
  
• 260380 USER INTERFACE: In macOS 10.14. Mojave, scrolling in the navigator garbled the text.
  
• 258061 USER INTERFACE: Operation Profiles could not be selected in the list in their settings dialog using the up and down arrow keys of the keyboard. The selection seemed to change with pressing the keys, but the Operation Profile did not get selected.
  
• 245547 USER INTERFACE: The 3D texture alignment was not greyed out when the function was not available.
  
• 260111 ZOOM: Zooming with track pad on a rotated view not only changes size of object but also offset objects on a spiral path.

MacOS