Cirrus SR20 G1000 Год выпуска: 2015 Жанр: Aircraft Разработчик: vFlyteAir Издатель: vFlyteAir Платформа симулятора: X-Plane 11 Тип издания: лицензия Таблэтка: Не требуется Системные требования: X-Plane 11.10+ (not compatible with X-Plane 10) Windows, Mac or Linux 2Gb VRAM Minimum - 4GB+ VRAM Recommended SIDs, STARs, and approaches require installation of additional navigation data, see user manual for details Описание: Glass Panel (modeled after the Cirrus Perspective® G1000) The vFlyteAir model of the Cirrus SR20 is equipped with avionics systems which resemble the look and feel of the real aircraft's “Perspective” system. “Perspective” is based on the Garmin G1000. According to Mario Donick, who created the glass panel system for the SR20, “Although we don't strive for a true simulation of the avionics, we took care for many details. Many features of the real Perspective G1000 system are modeled in the vFlyteAir version, but some are omitted or not implemented.” Download the user manual here New Version 2.6
VR Ready
Now with Auto-Updater (from STMA)
Tons of updates and upgrades (see version history tab)
Optimized for X-Plane 11 Superb Model by vFlyteAir
Photo-realistic textures by Igor Kirilove – all textures are very hi-res (4K), providing a very realistic look
Fully animated model – all the details are in this model. Check out the door hinge mechanisms when you open and close the doors!
Super accurate 3D modeling – the model is extremely accurate in scale and dimensions
Great flight model by Alan Shafto / AeroSimGaming The following features are available on the Primary Flight Display (PFD):
Artificial Horizon with high-resolution attitude indicator, flight director and roll scale
Speedtape with custom display of reference speeds
Altitude tape with custom vertical velocity indicator and minimums display
Enhanced HSI with turn indicator and three fully configurable bearing pointers for GPS, NAV1, NAV2 and ADF
Switchable inset windows for timer/references, minimums, wind, ADF, map, nearest airports, and flight plan
Cirrus-style top bar with power setting, frequencies and detailed GPS & autopilot information On the Multi Function Display (MFD), the following features are available:
Engine information system with switchable trim status
Detailed system page with engine parameters, declutter mode, used fuel, remaining fuel, remaining range, remaining time, anti-ice & oxygen gauges, density altitude, temperatures, ISA deviation
Basic support for SIDs, STARs and Approaches
Custom user interface for creating and editing flight plans (accessing X-Planes navdata and default FMC)
“Nearest” page for airports, navaids and related frequencies
Cirrus-style top bar with destination window, frequencies and GPS information
X-Plane default map with weather radar and traffic warnings with custom icons
Interactive checklists and user-definable charts In addition to PFD and MFD specific features, the following system-wide specifics are worth mentioning:
X-Plane autopilot with ROL, HDG, NAV, APPR, ALT, V/S, IAS modes and detailed status information
Custom calculations for ground speed, true airspeed, fuel & ranges, bearings and distances
Reversionary mode with engine information system and system summary (reacts on fuse & MFD failure) On-Screen Pop-Up Menu From any view in the simulator, you may click the small gear icon at the bottom-left of the screen to control several features of the model, including:
Open/Close the pilot door, passenger door and cargo door
Hide/Show the static ground elements (wheel chocks and pitot tube cover). NOTE: The static ground elements will be automatically removed for you if the airplane is under way.
Add/Remove a copilot – NOTE: adding the copilot also increased the total payload weight of the airplane by 70 kgs (175 lbs)
Click the upper right of the on-screen menu to dismiss the menu Other Notable Features:
Hypoxia is simulated at above 12,500’ cabin altitude. The screen will begin to dim if you are flying above 12,500’ MSL. Use the OXY switch on the lower center console to turn on oxygen supply and avoid hypoxia!
Oxygen supply is simulated – you have approximately 3 ½ hours of usable oxygen on board. The oxygen supply will begin to deplete slowly when the OXY switch is ON
Anti-Ice fluid is simulated – there are 3.5 gallons of anti-ice fluid available. The supply will deplete when anti-ice switch is ON
ICE lights are modeled – use the ICE light switch to inspect the wing leading edges for ice build-up at night
The Cirrus BRS® parachute recovery system is modeled – click on the BRS handle on the cabin ceiling to deploy the parachute in case of emergency. NOTE: Engine should be OFF, and airspeed should be below 120 KTS when deploying the parachute!
Cirrus “Single Lever Throttle Control” is modeled – the SR20 automatically adjusts propeller speed through the use of the throttle lever. There is no separately-controlled propeller lever.
Customized HDR night lights – there are four dome lights inside the cockpit that will provide white flood lighting with HDR on in your rendering settings
Custom exterior lighting – all lights on the exterior (landing lights, strobe lights and navigation lights) are modeled using X-Plane parameterized lighting.
10 Factory liveries provided – because Cirrus uses a special heat-resistant paint for their airplanes, the 10 liveries provided are based on Cirrus originals.
Custom sounds – try opening the passenger or pilot door while the engine is running! Дополнительная информация: Current version: 2.6 - Last updated April 2nd 2018 Установка: распаковать и скопировать в папку "X-Plane 11\Aircraft"
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum